Water Features Installation

Water feature installation services in Edmonton, sherwood park, St, Albert, Leduc, Beaumont, Fort Saskatchewan, Spurce Grove, and all other surrounding areas.

Water features installation services in edmonton

We make your garden beautiful by installing the fountains, pools, ponds, rills, artificial waterfall and streams.
A water feature can be range in size from a desk top water fountain to a large indoor waterfall that covers an entire wall in a large building, and can be made from any number of materials, including stone, stainless steel, resin, iron and glass. We have installed water features in Edmonton and its surrounded areas. 

Water features add sound, texture, and movement to landscaping designs and help homeowners to feel that their surroundings are more natural and unique.

Water features help to make landscape one of a kind. It gives unique looks to the landscape.
Water features require a little amount of maintenance. Simple wall fountains, huge cascading waterfalls, and other pondless water features are good choices for low maintenance.

Water features can fit in a small space, so don't ignore this. 
Contact us

Water feature installation process

Step 1: Dig the Hole

Step-1 of water feature installation. Dig the hole

Purchase the water feature. Determine the placement of water feature where it need to install in your front yard or backyard. Mark out the outline of the place with landscape paint. Dig a hole wide and deep enough to accommodate the pump and pond.

Step 2: Spread the Underlayment and Liner

Step 2 of water feature installation: Spread the Underlayment and Liner

Underlayment protects the rubber liner from tears caused by roots and rocks. Spread out a large piece so it covers the bottom as well as sides. Temporarily secure both pieces with large rocks.

Step 3: Position the pump

Step 3 of water feature installation: Position the pump

Set the pump into the pond at correct position. Position the rocks around and base of the pump. Also insert decorative and other stones in the pond with proper support.

Step 4: Fill the pond

Step 4 of water feature installation: Feed the pond

Fill the pond with water so that the underlayment and liner settle into place. Continue filling the water until the appropriate level is reached. Attach the pump to a water source.

Step 5: Complete and Test the Water feature

Do finishing of the edge of the pond with the help of stones to conceal the underlayment and liner. Trim off any excess. Add water plants and other decorative features to complete the pond. Plug in the fountain and turn it on the fountain to ensure that it works properly.

Contact us

Facts & Questions about water features

Here are the few questions the homeowner asks about water features.

How long does a fountain pump last? 

Answer. By proper care you can run the fountain without any problem for 3 to 5 years. Keeping it running as much as possible will extend the life of your pump. Secondly, your water will stay cleaner.

Do water features need electricity? 

Answer. Yes, water features need electricity to pump the water round. Water features can be wired into the mains or solar powered. Many do not need to be plumbed into mains water and simply run off an internal reservoir.

Are water fountains expensive to run? 

Answer. Water fountains don't use a much power electricity. If you use less water and low horsepower pump then you can reduce the electrical consumption. Most water fountains cost less than 75$ CAD per month to operate several hours per day.

Should I turn off my waterfall at night? 

Answer. By powering off the waterfall will make the water quiet and still, which means there won't be as many water molecules circulating and connecting with air that is rich in oxygen near the surface. So the oxygen level in the pond will be drop down. Moving water is necessary for all ponds. Fountain pumps are designed to run 24 hours day.

Excellence never stops

bring the sounds of nature to your doorstep by installing water features in your landscape. 

Contact us